TUSCAN
   
DIVERS

Worldwide Dive Travel

HOME

ABOUT US

DESTINATIONS
Aggressor Fleet
Bikini Atoll
Bikini Costs

Galapagos Islands
Grotta Giusti
Gozo
Lipari
Maratea
Palau
Red Sea
Scapa Flow
Truk Lagoon

COLTRI PRODUCTS
 

TERMS & CONDITIONS

CONTACT US

LINKS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Coltri Compressors (portable)
Coltri Compressors (static)
Coltri Compressors (Nitrox)

Coltri Lamps

 

In our opinion, the best in the world. Contact us for prices

MCH 8/EM Standard - 5 cfm Single Phase Electric

  • Charging rate - 135l/min - 8m3/h - 5 cfm
  • Driven by - Single phase electric motor 3 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Noise Level - 78 dB - ISO 3746
  • Weight - 99 KG
  • Measurements - H 63.5cm x L 85.5cm x W 45cm

 

MCH 8/EM Standard - 5 cfm Single Phase Electric

MCH 11/EM Standard - 7 cfm Single Phase Electric

  • Charging rate - 195l/min - 11m3/h - 7 cfm
  • Driven by - Single phase electric motor 4 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Noise Level - 78 dB - ISO 3746
  • Weight - 99 KG
  • Measurements - H 63.5cm x L 85.5cm x W 45cm

 

MCH 11/EM Standard - 7 cfm Single Phase Electric

MCH 13/ET Compact - 7.5 cfm Three Phase Electric

  • Test purge
  • Weight - 141 KG
  • Emergency Stop
  • Noise Level - 79.4 dB - ISO 3746
  • Charging rate - 215l/min - 13m3/h - 7.5 cfm
  • Driven by - Three phase electric motor 4 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Variable Pressure switch with auto stop function
  • Measurements - H 84cm x L 89cm x W 60cm
  • Low oil pressure indicator light
  • Auto drain function
  • Purge on start-up
  • Hour meter Semi-sound proofed filling station.

 

This compressor switches off automatically when the pressure set by the operator is reached. Timed condensate discharge using electromagnetic solenoid valves. The tank mounted on the frame holds the condensate for pollution free disposal. Vibration reduction is achieved by insulating the motor and pumping unit from the frame by means of rubber supports. Special consideration has been given to the cooling of this compressor. The cooling fan diameter has been increased to 440mm and grills on the frame ensure that cooling air flows smoothly through the unit. Oil and filter changing are a simple operation on this compressor.
 

 

MCH 13/ET Compact - 7.5 cfm Three Phase Electric

MCH 13/ET Standard - 7.5 cfm Three Phase Electric

  • Charging rate - 215l/min - 13m3/h - 7.5 cfm
  • Driven by - Three phase electric motor 4 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Noise Level - 80.7 dB - ISO 3746
  • Weight - 99 KG
  • Measurements - H 63.5cm x L 85cm x W 45cm

The MCH13/ET standard uses a pumping unit that is made from top quality materials; connecting rods from aluminium alloy, stainless steel intercoolers and aftercooler that are more than four metres in length, cylinders of special cast iron. The three-phase electric motor uses an aluminium housing to keep weight to a minimum this makes the station very compact.
 

MCH 13/ET Standard - 7.5 cfm Three Phase Electric

MCH 16/ET Compact - 9.3 cfm Three Phase Electric

  • Test purge
  • Weight - 151 KG
  • Emergency Stop
  • Noise Level - 81 dB - ISO 3746
  • Charging rate - 265l/min - 16m3/h - 9.3 cfm
  • Driven by - Three phase electric motor 5.5 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Variable Pressure switch with auto stop function
  • Measurements - H 84cm x L 89cm x W 60cm
  • Low oil pressure indicator light
  • Auto drain function
  • Purge on start-up

 

Hour meter Semi-sound proofed filling station. This compressor switches off automatically when the pressure set by the operator is reached. Timed condensate discharge using electromagnetic solenoid valves. The tank mounted on the frame holds the condensate for pollution free disposal. Vibration reduction is achieved by insulating the motor and pumping unit from the frame by means of rubber supports. Special consideration has been given to the cooling of this compressor. The cooling fan diameter has been increased to 440mm and grills on the frame ensure that cooling air flows smoothly through the unit. Oil and filter changing are a simple operation on this compressor.
 

 

MCH 16/ET Compact - 9.3 cfm Three Phase Electric

MCH 16/ETS Super Silent - 9.3 cfm Three Phase Electric

  • Test purge
  • Weight - 222 KG
  • Emergency Stop
  • Oil level sight glass
  • Interstage pressure gauges
  • Noise Level - 68.8 dB - ISO 3746
  • Charging rate - 265l/min - 16m3/h - 9.3 cfm
  • Driven by - Three phase electric motor 5.5 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Variable Pressure switch with auto stop function
  • Measurements - H 137cm x L 90cm x W 87cm
  • Low oil pressure indicator light
  • Temperature gauge
  • Auto drain function
  • Purge on start-up
  • Hour meter

MCH 16/ETS Super Silent has been sound proofed so well that a noise level of only 66dB can be heard at just a metre away. The pump is the tried and tested three-stage unit with cylinders made of special heavy duty cast iron. The compressed air is cooled with a stainless steel aftercooler that ensures the sir entering the filter system is only 15 degrees C hotter than the intake air. There are safety relief valves for each compression. The final stage safety relief valve is available in different settings ranging from 225-330 bar. It has two condensate separators and one filter chamber with a rechargeable cartridge, this ensures the air compressed into the cylinders is clean and free of contaminates.

» Optional additional whips are available
 

 

MCH 16/ETS Super Silent - 9.3 cfm Three Phase Electric

MCH 16/ET Standard - 9.3 cfm Three Phase Electric

  • Charging rate - 265l/min - 16m3/h - 9.3 cfm
  • Driven by - Three phase electric motor 5.5 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Noise Level - 82.3 dB - ISO 3746
  • Weight - 109 KG
  • Measurements - H 63.5cm x L 85cm x W 45cm

The MCH 16/ET Standard uses a pumping unit that is made from top quality materials; connecting rods from aluminium alloy, stainless steel intercoolers and aftercooler that are more than four metres in length and cylinders of special cast iron. The three-phase electric motor uses an aluminium housing to keep weight to a minimum this makes the station very compact.
 

MCH 16/ET Standard - 9.3 cfm Three Phase Electric

MCH 16/ETC Standard - 9.3 cfm Three Phase Electric

  • Charging rate - 265l/min - 16m3/h - 9.3 cfm
  • Driven by - Three phase electric motor 5.5 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Noise Level - 80.3 dB - ISO 3746
  • Weight - 136 KG
  • Measurements - H 66.5cm x L 85.5cm x W 47.5cm

This reliable three stage compressor, with its three-phase electric motor is enclosed in a frame that protects the operator from the moving parts. It has two filling hoses with independent filling valves.
 

 

MCH 16/ETC Standard - 9.3 cfm Three Phase Electric

MCH 26/ET Compact - 14 cfm Three Phase Electric

  • Test purge
  • Weight - 286 KG
  • Emergency Stop
  • Noise Level - 72.4 dB - ISO 3746
  • Charging rate - 420l/min - 26m3/h - 14 cfm
  • Driven by - 2 x Three phase electric motor 4 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Variable Pressure switch with auto stop function
  • Measurements - H 133cm x L 89cm x W 85cm
  • Low oil pressure indicator light
  • Auto drain function
  • Purge on start-up

Hour meter Filling station comprising two completely independent compressors for completely reliable and versatile use. Operation is fully automatic and up to four cylinders can be filled simultaneously. The compressor housing is lined with a sound reducing material which limits noise to 78dB. The internal air conveyors ensure excellent cooling.
 

 

MCH 26/ET Compact - 14 cfm Three Phase Electric

MCH 32/ET Compact - 18 cfm Three Phase Electric

  • Test purge
  • Weight - 306 KG
  • Emergency Stop
  • Noise Level - 75 dB - ISO 3746
  • Charging rate - 520l/min - 32m3/h - 18 cfm
  • Driven by - 2 x Three phase electric motor 5.5 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Variable Pressure switch with auto stop function
  • Measurements - H 133cm x L 89cm x W 85cm
  • Low oil pressure indicator light
  • Auto drain function
  • Purge on start-up
  • Hour meter

Filling station comprising two completely independent compressors for completely reliable and versatile use. Operation is fully automatic and up to four cylinders can be filled simultaneously. the compressor housing is lined with a sound reducing material which limits noise to 78 dB. The internal air conveyors ensure excellent cooling.
 

MCH 32/ET Compact - 18 cfm Three Phase Electric

MCH 36 ETS Silent - 22cfm Three Phase Electric

  • Charging rate: 600 L/min
  • 10 L - 200 Bar: 3,3 min
  • Working pressure: 225 Bar 3200 Psi - 425 Bar 6000 Psi
  • Driven By: Electric three phase motor
  • Power: 15 Kw
  • Dimensions: Length 130 cm, Height 178 cm, Width 78 cm
  • Dry weight: 420 Kg
  • Noise: 75 dB - ISO 3746
  • Number of stages: 4
  • Number of cylinders; 4
  • Oil/moisture separator: 3
  • Hyperfilter active carbon and molecular sieve: 2
  • Interstage coolers and after coolers: Stainless steel
  • Breathing air: DIN 3188 EN 12021 CGA E

 

MCH 36 ETS Silent - 22cfm Three Phase Electric

MCH 36 OPEN VM - 22cfm Three Phase Electric

Charging rate: 600 L/min - 36 m3/h - 21 CFM
10 L - 200 Bar: 3,3 min
Working pressure: 225 Bar 3200 Psi - 425 Bar 6000 Psi - 425 Bar 6000 Psi
Rpm Pumping Unit: 1300
Driven By: Electric Three Phase Motor
Power: 15 Kw
Noise: 75 dB - ISO 3746
Number of stages: 4
Number of cylinders; 4
Oil/moisture separator: 3
Hyperfilter active carbon and molecular sieve: 2
Interstage coolers and after coolers:
Stainless steel
Breathing air: DIN 3188 EN 12021 CGA E

 

MCH 36 OPEN VM - 22cfm Three Phase Electric